***
My store is not taking any orders today due to health reasons which limit to my productivity.
***
My custom harmonicas, combs and tools are made to order. If items are out of stock on my website, it's likely due to my workload is at the limit. Please see my dealers for all items I offer.
Maximum production times may be up to 16 business days for combs and tools. Current production time for custom harmonicas are shown on the top of the custom page.
Thanks for your support.
Andrew
Fits the following harps:
Suzuki Manji, Promaster, Suzuki Olive.
Also fits
- Dabell Contender
- Dabell Noble
- Suzuki HarpMaster, BluesMaster (*)
- Bushman Delta Frost(*)
The stock Manji comb is slightly smaller than the reed plates. My comb is a hair bigger than the plates so that the harp is more comfortable to hold.
HarpMaster, BluesMaster:
* Note: For best overall performance, don't change the comb of a HarpMaster or BluesMaster harmonica. I recommend using the stock ABS comb and work to get better performance by using The Reed Plate Claws™ to straighten reed plates. However, some hobbyists like to experiment with the tonal qualities of switching from an ABS "recessed" comb to a solid surface "sandwich-type" comb and these combs will work with a little help.
HarpMaster and BluesMaster harmonica reed plates were designed to be used with a recessed comb. These reed plates do not have a groove into which the coverplate can lock in. Although you can install these reed plates onto a "sandwich-type" comb, you may experience a loss of airtightness if the coverplates become bent. You will find some useful tip on converting these harmonicas here. (Sandwich-type harmonica tips and tricks)
Delta Frost:
Older versions of the Bushman Delta Frost used Harpmaster reed plates. The current reed plates are of lesser quality and are usually warped. Instead of trying to improve them with a comb upgrade, I suggest straightening the reed plates. Please see The F tool™.
More information and instructions for installing my combs are found on the Combs page.
I offer custom combs for Hohner Marine band, Hohner MS-series, Hohner Golden Melody, Hohner Special 20, Seydel 1847, Seydel Solist Pro, Seydel Favorite, Seydel Big Six, Suzuki, Lee Oskar, Delta Frost, Vintage Huang and Hering.
Earth-friendly, high-performance combs made for demanding players. Ideal for all musicians who want great tone and "overblow-level" response from their instrument.
Looking for that authentic fat, woody tone? Darken your harmonica™ with one of my combs.
Standard combs are "long-slot" and are suitable for any key. "Short slot" combs may be used for higher keys if that is your preference and are available for most models. An additional charge is applied for "short-slot".
If you are unsure, don't worry about it and get the standard "long-slot". Many players cannot feel or hear the difference between comb slot length on higher keys.
Regular thickness is 5.9 mm +/- 0.3 mm (quarter inch). How does that compare with other combs? The thickness of a stock Marine Band comb is just a hair over 5.7mm. Once flat-sanded, it's just a hair under 5.6mm.
I can make my combs extra-thin (5.2 mm) for increased response or for customers with a medical condition of the jaw resulting in reduced mouth opening. An additional charge is applied for non-standard thickness.
I no longer offer Extra-thick combs.
Please expect a production time of up to 7 business days. This is due to a high workload and the amount of time it takes to ensure each comb meets my specifications.
For quicker lead times, these dealers usually have my combs in stock: Dealers page
All combs are made to order using a CNC mill. These combs are beautiful and designed to be extremely comfortable to play. I flatten each comb by hand to ensure the highest performance and best tone using a reference precise to .000025" per 6" (25 millionths of an inch).
You can soak my combs - or your entire harp - under water without the risk of swelling, warping or damage.
I measure every single comb's flatness front-to-back, side-to-side and everything in between. With no air in between the plate and the comb, you can feel how the pieces of your harmonica "become one" even before you get any screws into place.
You can watch a demonstration of how I carefully flatten each comb here: Custom Harmonica Comb - Andrew's method
I don't subcontract any part of the process of manufacturing my Dark Combs. I make these combs personally and therefore can offer exceptional quality combs at reasonable rates. An upgraded comb shouldn't have to cost as much as a brand new harp. I offer savings when you choose random color and standard thickness. I offer bulk rates, too. If you are a harmonica service provider or customiser, contact me for further discounts and "just-in-time" inventory.
To improve the instrument. An airtight harmonica is easier to play and has better tone.
But simply switching the comb will not make it play better. A flat comb is only one part of making your harmonica more airtight.
Harmonicas require a minute or two of preparation work before combs can be installed. My combs offer superior air tightness. They focus on high performance and do not compromise quality for ease of installation.
Instructions and support is included with the purchase of combs.
Unsealed Pearwood combs, when perfectly flat, are the model of excellence. Unfortunately, they do not last and will break down and warp with time.
If you have any questions about installing a comb and making your harmonica play well, contact me; you get free email support with the purchase of my combs.
How to install a Dark comb™ (it's very easy!)
Dark combs™ made from an earth-friendly composite of 100 per cent recycled paper, resin produced from naturally occurring raw materials and selected natural pigments. This material is strong, dense, waterproof, hypoallergenic, and does not emit any volatile organic compounds, including formaldehyde. It has been certified food safe, contains no petroleum-based chemicals and doesn't have an odour (*).
These combs have all the benefits of a flat, unsealed Pearwood comb with none of the drawbacks. This material allows me to focus on flatness without compromising the look and feel. The affordable price reflects how manageable it is to produce excellent combs out of this material. But don't be fooled - these are my very best combs. I do not know of any material that is better suited for harmonica combs.
Dark combs™ have a glossy smooth front for comfortable playing. The sides and back of my Dark combs are lightly polished to a matte finish which has a nice appearance and feels comfortable to hold. Over time and with use, these surfaces will develop their own natural shine as they become worn in.
Dark combs™ do not shatter when dropped on the floor, and their production has a much lower environmental impact than most other man-made materials. Many types of materials including Corian, brass or other metals can make the harmonica sound very bright. Dark combs help your harmonica produce the fat, dark, woody tone you get from a harmonica with an unsealed Pearwood comb.
Base price includes random colour. An additional charge applies if you prefer to choose your colours.
Free download (PDF)Harmonicas require a minute or two of preparation work before combs can be installed. My combs offer superior air tightness. They focus on high performance and do not compromise a good air seal for easier installation.
Instructions are provided (click image to download).
Here's a quick demonstration:
Contact me about making a comb for your model harmonica. No extra fee applied - combs for most "sandwich-style" harmonicas offered at regular prices.
(*) Milling the material at high speed causes the combs to have a slight odour. Freshly-milled combs will have a slight odour for about two weeks.
(**) Extra thickness material recommended to match original specifications (7 mm).
(***) Some harmonica reed plates were designed to be used with a recessed comb. These reed plates do not have a groove into which the coverplate can lock in. Although you can install these reed plates onto a "sandwich-type" comb, you may experience a loss of airtightness if the coverplates become bent. You will find some useful tip on converting these harmonicas here. (Sandwich-type harmonica tips and tricks)
